An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Classification: Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)
NSN 6130-00-229-4120
NSN 5905-01-392-3564
NSN 5905-01-564-2585
NSN 5975-01-123-9111
NSN 5930-00-717-2388
NSN 5930-01-220-3058
NSN 5996-01-453-7687
NSN 5996-01-370-6593
NSN 5895-00-855-8307
NSN 6220-00-823-6688
NSN 5999-00-583-7949
NSN 6110-01-369-8038