No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5965-01-452-4189
NSN 6610-01-518-1264
NSN 5925-01-339-6540
NSN 5935-01-487-6183
NSN 5999-01-532-8992
NSN 6645-01-302-9608
NSN 5950-01-265-3974
NSN 6620-01-483-1138
NSN 6130-00-183-9322
NSN 6650-01-378-7875
NSN 6610-01-560-9461
NSN 5950-01-441-8700