No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Articles of paper pulp, paper, paperboard, cellulose wadding or webs of cellulose fibers, nesoi
NSN 6145-00-204-5992
NSN 5975-01-212-6739
NSN 5990-00-212-4316
NSN 6135-01-512-8740
NSN 5920-01-602-3351
NSN 6150-00-905-6070
NSN 5855-01-118-2210
NSN 6130-01-367-3655
NSN 5945-01-214-6133
NSN 5985-01-361-4964
NSN 5930-01-236-4209
NSN 6105-01-476-6365