No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5935-01-337-8805
NSN 6320-01-220-2264
NSN 6320-01-489-6044
NSN 5835-01-384-3206
NSN 6240-00-104-4662
NSN 6685-01-157-0760
NSN 5905-01-224-3974
NSN 2925-00-238-1668
NSN 4140-00-080-8740
NSN 6135-01-607-5478
NSN 5855-00-879-7245
NSN 6130-01-580-7034