No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5910-00-155-0327
NSN 5960-01-512-0233
NSN 6610-00-661-1797
NSN 5999-01-007-8208
NSN 6145-01-634-0388
NSN 6145-01-564-4081
NSN 5998-01-575-7743
NSN 6645-00-355-8610
NSN 5999-00-073-0642
NSN 5985-01-571-1037
NSN 6145-01-435-6458
NSN 4140-01-634-0330