A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 4140-00-053-8358
NSN 5915-01-317-3158
NSN 5945-01-164-8241
NSN 5935-01-172-7356
NSN 5835-00-233-6327
NSN 6130-00-233-0390
NSN 5835-00-233-6327
NSN 5855-01-542-2016
NSN 6105-00-633-7660
NSN 5990-00-964-6422
NSN 5910-01-415-5758
NSN 5835-00-794-7500