A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6645-00-155-2398
NSN 5945-01-158-8229
NSN 4140-01-629-2472
NSN 5920-01-099-3098
NSN 6610-00-267-9944
NSN 5855-01-073-4991
NSN 5996-01-263-6776
NSN 5990-01-146-9126
NSN 5985-01-345-8078
NSN 5895-01-352-3628
NSN 5999-00-419-3141
NSN 5960-00-078-9500