A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Dept. of the Navy 
Singapore 
Turkey Classification: Copper screws, nuts, bolts, rivets, and other fasteners not threaded
NSN 6110-00-174-1653
NSN 5915-01-288-5165
NSN 5950-01-124-0572
NSN 5945-01-155-5351
NSN 5965-01-392-0049
NSN 5895-00-819-1273
NSN 6320-01-347-2638
NSN 5985-00-146-0118
NSN 6130-01-347-4844
NSN 6135-01-461-2915
NSN 7035-01-380-0547
NSN 6130-00-081-2186