No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5965-01-332-9825
NSN 6620-01-330-8802
NSN 5920-00-239-6552
NSN 6135-00-152-8729
NSN 5998-01-501-6978
NSN 5975-00-171-3608
NSN 5930-00-783-8392
NSN 6105-00-101-3699
NSN 7035-01-175-4321
NSN 5975-00-161-0026
NSN 5945-01-139-5179
NSN 6610-01-618-2158