A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 7035-01-599-5564
NSN 6320-01-021-6633
NSN 5996-01-050-6910
NSN 5999-01-567-8817
NSN 5915-01-468-9123
NSN 4140-00-234-8524
NSN 4140-01-187-4990
NSN 5835-01-647-6426
NSN 5910-01-149-1912
NSN 6320-00-682-3448
NSN 5935-01-460-2344
NSN 6130-01-416-3561