No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-00-599-5546
NSN 6130-01-196-4545
NSN 6320-01-441-2438
NSN 5925-01-383-1463
NSN 6105-00-968-7525
NSN 6320-01-578-6006
NSN 6240-00-045-9844
NSN 5920-00-331-0583
NSN 6145-01-327-2674
NSN 5996-01-085-9491
NSN 5960-00-592-4118
NSN 6130-01-099-9800