Detail Specifications
Body Material:
Plastic, diallyl phthalate, mil-m-14, type sdg
Body Style:
Rear panel mounted type
Overall Length:
Between 3.750 inches and 4.000 inches
Overall Height:
1.200 inches
Overall Width:
1.070 inches
Keyway Width:
0.105 inches
Mounting Hole Diameter:
0.156 inches
Mounting Hole Quantity:
2
Environmental Protection:
Dripproof
Mounting Hole Style:
Bushing mounting w/2 holes and keyway
Contact Material:
Beryllium copper
Contact Surface Treatment:
Any acceptable
Interruption Indicator Method:
Incandescent lamp
End Application:
Panel, gear, ahead ay99 201-7429276
Fuse Accommodation Quantity:
1
Accommodated Fuse Length:
1.250 inches
Accommodated Ferrule Diameter:
0.250 inches
Resistor Rating:
2050.0 ohms
Indicating Lamp Voltage Range In Volts:
+81.0/+90.0
Length From Front Protrusion To Mounting Surface:
0.830 inches
Center To Center Distance Between Outside Mounting Holes Along Length:
0.750 inches
Center To Center Distance Between Outside Mounting Holes Along Width:
0.875 inches
Bushing Hole Diameter:
0.875 inches
Center To Center Distance Between Keyway And Bushing Hole:
0.437 inches
Screw Thread Diameter:
0.164 inches
Screw Thready Qty Per Inch (tpi):
32.0
Current Carrying Rating In Amps:
30.0
Fuse Terminal Type Accommodated:
Ferrule
Test Data Document:
81349-mil-prf-19207 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
2 threaded stud
Specification Data:
81349-mil-prf-19207/19 government specification
Item Name:
Fuseholder,panel Mount
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
