Our Updated Products - Page 20 of 100

steel screw material

fastener length 2in. ⁓2-1/64

terminal length 1.5 inches nonderated operating temp between -55 degrees celsius and 85 degrees celsius

fastener length 1.75in. ⁓1-3/4 steel screw material

thread length 1.75in. ⁓1-3/4 steel screw material

material aluminum qq-a-601 alloy a356 temper t6 o/a dp 3.472 to 3.486 in. o/a diameter 3.918 to 3.958 in.

fastener length 1in. ⁓1/64 steel screw material

thread length 0.764 inches minimum and 0.875 inches maximum steel screw material

fastener length 0.5in. ⁓1/2 steel screw material

machine screw nsn 5305000132251. the screw material document and classification is qq-s-633 federal specification all material responses and the screw surface treatment is cadmium or zinc

spur gearshift nsn 3040000132240.another reference number is c310170311 and the cage code is 88818

machine screw nsn 5305000132228. the thread direction is right-hand and the thread length is 2.0inches. ⁓2-1/64inches

paper metallized fixed capacitor nsn 5910000132227. the nonaerated operating temp is between -55.0 degrees celsius and 125.0 degrees celsius and the nonaerated continuous voltage rating and type per section is 50.0 dc single section

pipe expansion joint nsn 4730000132207. the flange outside diameter is 50.25 inches and the flange material is rubber fabric reinforced

machine screw nsn 5305000132203. the nominal thread diameter is 0.216in. (uts #12) and the thread quantity per inch is 24

pressure switch nsn 5930000132202. the unthreaded mounting hole diameter is between 0.195 inches and 0.23 inches and the distance between mounting facility centers is 4.0 inches

28 in. lg. 5.285 in. dia.

reservoir and seat nsn 1650000116049. also reference 294051-1 and 756 267

hexagon plain nut nsn 5310000115120. the material is steel and the surface treatment is phosphate

lock washer nsn 5310000115093. the style designator is and the nondefinitive spec/std data is a class and 2 style

honing unit holder nsn 5130000115088. cage codes are b7373 and 58436

power transformer nsn 5950000115058. the cage code is 88601

quick release pin nsn 5315000115041. material steel comp 1144 and the material document and classification is aisi assn standard single material response.

altitude control as nsn 5826000115039.

electrical plug connector nsn 5935000115031.

nonaircraft fue nozzle spray tip nsn 2910000115010. the material is steel and the cage codes are 88080 and 54936 also 14541

pneumat drill valve nsn 3820000115003.

delay line nsn 5999000114997. the input impedance rating is 1.0 kilohms and the output impedance rating is 1.0 kilohms

hexagon head cap screw nsn 5305000114926. the thread length is 1.0inches. ⁓1/64inches and the fastener length is 4.25inches. ⁓4-1/4inches

pipe to tube elbow nsn 4730000114920. the seat nominal radius is 0.062 inches 1st end and the nominal outside diameter tube accommodated is 0.312 inches 1st end.

pipe to tube straight adapter nsn 4730000114919. the thread type is 2b 1st end and the nominal thread size is 0.125inches. 2nd end ⁓2-1/64inches

delay line nsn 5999000114916. the input impedance rating is 500.0 ohms and the output impedance rating is 500.0 ohms

conductive gasketing material nsn 5999000114912. the surface treatment is silver and the material is copper and rubber silicone class q

electron tube nsn 5960000114910. the cage codes are 94117 and 82219

electromagnetic relay nsn 5945000114908. the thread series designator is unc single mounting facility

film fixed resistor nsn 5905000114902. the temp range of temp coefficient in deg celsius is -55.0 to 175.0 and the temp coefficient of resistance in ppm per deg celsius is -25.0 to 25.0

mica dielectric fixed capacitor nsn 5910000114898.

electromagnetic relay nsn 5945000114897. the main contact load current rating at maximum rated voltage is 10.0 amperes dc resistive load and the main contact maximum voltage rating in volts is 28.0 dc

metallic bent tube nsn 4710000114591. the material is steel and the heat treatment is annealed

radio frequency coil nsn 5950000114589. the mounting method is terminal single group and the body length is 0.58 inches

frequency test set nsn 6625000136887.

probe assembly nsn 4920000136884.

drag strut bushing nsn 5365000136873.

overall length between 1.863in. ⁓1-7/8 stator input voltage rating in volts 11.8

leg length 2.055 inches 1st end aluminum material

aircraft engine model t64-ge415

steel ams5513

overall length 2.75in. ⁓2-3/4 mounting slot width 0.15 inches single mounting facility

fastener length between 0.365in. and 0.385in. ⁓25/64 steel material

steel material