Our Updated Products - Page 25 of 100

selector sleeve nsn 1650000133536.

pump design control activity motor 75250

drive splined shaft nsn 3040000133518.

lift-check valve nsn 4820000133514.

head diameter between 0.3 inches and 0.332 inches fastener length between 1.188in. and 1.25in. ⁓1-1/4

countersink angle between 80 degrees and 82 degrees fastener length between 0.969in. and 1in. ⁓1/64

fastener length 0.875in. ⁓7/8 countersink angle between 80 degrees and 82 degrees

fastener length 0.75in. ⁓3/4 countersink angle between 80 degrees and 82 degrees

thread length 0.546in. ⁓35/64 steel screw material

fastener length 0.5in. ⁓1/2 countersink angle between 80 degrees and 82 degrees

overall length 12.688in. ⁓12-45/64 steel material

fastener length between 0.46in. and 0.437in. ⁓7/16 countersink angle between 80 degrees and 82 degrees

thread length 0.275in. ⁓9/32 head height between 0.332in. ⁓11/32

minimum tensile strength 60000 pounds per square inch thread length 0.375in. ⁓3/8

thread length 0.213in. ⁓7/32 head diameter between 0.38 inches and 0.332 inches

thread length between 0.179in. and 0.195in. ⁓13/64 head height between 0.055in. and 0.071in. ⁓5/64

first leg length 1.16 inches steel material

first leg length between 0.8 inches and 0.84 inches steel material

cres ams5680 0.115 min 0.135 max in. thk matl 7.96 min 8.04 max in. lg 2.79 min 2.85 max in. w 3.48 min 3.6 max in. h

overall length between 3.06in. and 3.16in. ⁓3-11/64 steel material

overall length between 3.06in. and 3.16in. ⁓3-11/64 material thickness between 0.23 inches and 0.27 inches

overall length between 3.79in. and 3.83in. ⁓3-27/32 steel material

thread length between 0.761in. and 0.792in. ⁓51/64 countersink angle between 80 degrees and 82 degrees

cres ams5510 0.115 min 0.135 max in. thk matl 3.143 in. approx lg 1.747 in. approx h

thread length 0.667in. ⁓43/64 countersink angle between 80 degrees and 82 degrees

fastener length 0.625in. ⁓5/8 countersink angle between 80 degrees and 82 degrees

fastener length between 0.46in. and 0.437in. ⁓7/16 minimum tensile strength 60000 pounds per square inch

thread length 0.292in. ⁓19/64 head diameter between 0.257 inches and 0.279 inches

overall length 1.35in. ⁓1-23/64

fastener length between 0.281in. and 0.312in. ⁓5/16 countersink angle between 80 degrees and 82 degrees

thread length 0.167in. ⁓11/64 countersink angle between 80 degrees and 82 degrees

fastener length 0.5in. ⁓1/2 minimum tensile strength 60000 pounds per square inch

thread length 0.371in. ⁓3/8 countersink angle between 80 degrees and 82 degrees

nominal length 2.5 inches 1st end opening pressure setting 9.5 pounds per square inch

cres ams5510; 0.12 min 0.13 max in. thk matl

thread length 0.75in. ⁓3/4 head diameter between 0.67 inches and 0.78 inches

thread length 0.625in. ⁓5/8 head height between 0.237in. and 0.256in. ⁓17/64

thread length 0.5in. ⁓1/2 head diameter between 0.67 inches and 0.78 inches

inertial n retainer nsn 6605000133140.

nominal thread diameter 0.312in. ⁓5/16 fastener length 2.75in. ⁓2-3/4

breach chamber nsn 2995000133133.

thread length 1.75in. ⁓1-3/4 head diameter between 0.557 inches and 0.59 inches

aluminum alloy ams 5540 0.015 in. min 0.02 in. max wall thk 6.923 in. min 6.953 in. max lg center hole to center

adapter nsn 2995000133124.

thread length between 2in. ⁓2-1/64 head height between 0.198in. and 0.216in. ⁓7/32

clamp nsn 4730000132978.

maximum discharge flow rate 50 gallons per minute operating speed at rated capacity 7300 revolutions per minute

tf33 engine

fastener length 0.625in. ⁓5/8 head height between 0.17in. and 0.12in. ⁓1/8

thread length 0.625in. ⁓5/8 head diameter between 0.287 inches and 0.39 inches