Our Updated Products - Page 5 of 100

6685000111998. di compound pressure-vacuum gage has a quantity of three mounting holes.

1430000111869. expansion chamber cap has the end item identification f-4 (phantom ii).

5998000111814. circuit card assembly has an overall length of 10.380 inches an overall height of 0.750 inches and an overall width 7.500 inches.

4730000111803. pipe nipple all ends of the thread size are 0.375 inches all ends.

5998000111776. circuit card assembly has an overall length of 10.380 inches an overall height of 0.750 inches and an overall width of 7.500 inches.

4520000111812. radiator valve cage code: 64332

5325000111752. fastener cage code: 61864

6930000111724. indicator simulated has a width of 1.170 inches a length of 3.975 inches and a height of 3.950 inches.

wire wound fixed resistor nsn 5905000111673. the terminal type is wire lead and the enclosure method is encapsulated.

4510000111710. roof drain cage code: 90955

1560000111257. aircraft tip has the special feature; 2nd material has cloth fabric.

trim position sensor assembly nsn 6615000109388. special features for an afcs servo assembly

5905000111668. at full rated power the wire wound fixed resistor has an ambient temperature of 25.0 degrees celcius.

1560000111667. bleed air duct assembly has the end item identification c-5a aircraft.

5905000111661. at full rated power the wire wound fixed resistor has an ambient temperature of 25.0 degrees celcius.

5905000111658. wire wound fixed resistor has an electrical resistance of 12.000 kilohms.

5305000111655. tapping screw has a hexagon head style and a head height of between 0.172 inches and 0.190 inches.

4720000111652. nonmetallic hose assembly cage codes: 00624 and 98897

5905000111651. wire wound fixed resistor has an electrical resistance of 11.000 kilohms.

5961000111644. thyristor semiconductor device has an overall length of 0.190 inches an overall diameter of 0.187 inches and a terminal length of 0.500 inches.

5305000111633. tapping screw has a fastener length that is between 0.469 inches and 0.531 inches.

4720000111632. nonmetallic hose assembly cage codes: 1wl60 98897 and 00624

5930000111618. rotary switch cage code: 80045

5950000111614. electromagnet cage codes: 09017 and 99313

5915000111612. band pass filter cage codes: 97942 21856 and 13058

5915000111611. band pass filter cage codes: 97942 and 13057

5961000111609. transistor has a hermetically sealed case.

5935000111607. receptacle dummy connector has a straight body style and a removeable cover.

3825000111604. bearing cone sleeve has a height of 1.254 inches.

5310000111606. nut cage codes: 79439 and 31568

5305000111527. machine screw has a fastener length of 0.560 inches.

5935000111589. electrica connector cage codes: 76823 and 29560

3040000111517. rigid connecting link has solid body construction.

1560000111502. spoiler actuator flap hinge has the end item identification aircraft model c141.

1560000111500. actuator fitting cage codes: 98897 8t119 and 7f311

6220000110109. light transmitt indicating panel has the end item identification: h-3 helicopter.

6220000110108. light transmitt indicating panel has the end item identification: h-3 helicopter.

3120000110106. sleeve bushing has square corner shapes.

4920000110103. control panel cage code: 06481

3120000110105. sleeve bushing cage code: r1120 78710 and 14153

4920000110090. control test set has the major components: printed wiring board 1; transformer 3; meter 1; switch 5; standoff 18; socket 4; resistor 17; relay 1; variable powerstay 1; neon lamp 14; terminal lug 37; light assembly 16; lamp 2; jack 4.

5825000110089. transponder set has the joint electronics type designation system item name: transponder set.

1650000110086. fluid filter has a body length of 0.282 inches.

5320000110076. split rivet has an oval truss head style and a head height of between 0.058 inches and 0.068 inches.

4030000110066. stud wire rope terminal is made of steel comp 4130 and has an anodize surface treatment.

6105000109803. motor-tachometer generator has an overall length of 1.63 inches and an overall width of 0.752 inches.

2840000109410. aircraft gas turbi metallic seal has a diameter of between 7.42 inches and 7.44 inches.

2840000109414. combustion ch patch cage code: 77445

5325000109390. nonmetallic grommet has a nonmetallic rating of between 55.0 shore durometer a and 65.0 shore durometer a.

5998000109398. electronic test extender card cage code: 94117