Our Updated Products - Page 70 of 100

thread length between 0.667in. and 0.75in. ⁓3/4 head diameter between 0.389 inches and 0.438 inches

material hardness rating between 38 rockwell c and 42 rockwell c steel material

steel mil-s-7420 comp e52100 0.625 in. min 0.6251 in. max od 0.6 in. lg

thread length between 0.355in. and 0.438in. ⁓29/64 countersink angle between 80 degrees and 82 degrees

steel ams6260e 1.635 in. length with splined ends

aircraft model ch-46a ch-46d engine starter

st bearing retainer nsn 2995000133683.

material cres passivated finish

steel corrosion resisting material

helical compression spring seat nsn 5340000133659.

0.59 in. lg 0.34 in. w with 0.18 in. through hole

thread length 1.134in. ⁓1-9/64 countersink angle between 80 degrees and 82 degrees

thread length between 0.969in. and 1.0in. ⁓1/64 countersink angle between 80 degrees and 82 degrees

steel 0.26 in. nom id one end 0.3933 in. od other end 4.267 in. o/alg

h-46

overall height 0.24 inches material hardness rating between 58 rockwell c and 60 rockwell c

thread length 0.384in. ⁓25/64 countersink angle between 80 degrees and 82 degrees

valve disk nsn 1650000133590.

fastener length 1.75in. ⁓1-3/4 countersink angle between 80 degrees and 82 degrees

plate assy nsn 1650000133586.

steel material

valve disk nsn 1650000133576.

fastener length between 0.844in. and 0.875in. ⁓7/8 countersink angle between 80 degrees and 82 degrees

thread length between 0.625in. ⁓5/8 nominal thread diameter 0.19in. (uts #10)

thread length 0.59in. ⁓19/32 countersink angle between 80 degrees and 82 degrees

connector receptacle both ends all conductors

thread length between 0.46in. and 0.437in. ⁓7/16 countersink angle between 80 degrees and 82 degrees

thread length 0.259in. ⁓17/64 countersink angle between 80 degrees and 82 degrees

valve cap nsn 4820000133555.

thread length between 0.23in. and 0.248in. ⁓1/4 fastener length 0.313in. ⁓21/64

valve seat nsn 4820000133541.

selector sleeve nsn 1650000133536.

pump design control activity motor 75250

drive splined shaft nsn 3040000133518.

lift-check valve nsn 4820000133514.

head diameter between 0.3 inches and 0.332 inches fastener length between 1.188in. and 1.25in. ⁓1-1/4

countersink angle between 80 degrees and 82 degrees fastener length between 0.969in. and 1in. ⁓1/64

fastener length 0.875in. ⁓7/8 countersink angle between 80 degrees and 82 degrees

fastener length 0.75in. ⁓3/4 countersink angle between 80 degrees and 82 degrees

thread length 0.546in. ⁓35/64 steel screw material

fastener length 0.5in. ⁓1/2 countersink angle between 80 degrees and 82 degrees

overall length 12.688in. ⁓12-45/64 steel material

fastener length between 0.46in. and 0.437in. ⁓7/16 countersink angle between 80 degrees and 82 degrees

thread length 0.275in. ⁓9/32 head height between 0.332in. ⁓11/32

minimum tensile strength 60000 pounds per square inch thread length 0.375in. ⁓3/8

thread length 0.213in. ⁓7/32 head diameter between 0.38 inches and 0.332 inches

thread length between 0.179in. and 0.195in. ⁓13/64 head height between 0.055in. and 0.071in. ⁓5/64

first leg length 1.16 inches steel material

first leg length between 0.8 inches and 0.84 inches steel material

cres ams5680 0.115 min 0.135 max in. thk matl 7.96 min 8.04 max in. lg 2.79 min 2.85 max in. w 3.48 min 3.6 max in. h