Our Updated Products - Page 9 of 100

overall length between 3.06in. and 3.16in. ⁓3-11/64 material thickness between 0.23 inches and 0.27 inches

overall length between 3.79in. and 3.83in. ⁓3-27/32 steel material

thread length between 0.761in. and 0.792in. ⁓51/64 countersink angle between 80 degrees and 82 degrees

cres ams5510 0.115 min 0.135 max in. thk matl 3.143 in. approx lg 1.747 in. approx h

thread length 0.667in. ⁓43/64 countersink angle between 80 degrees and 82 degrees

fastener length 0.625in. ⁓5/8 countersink angle between 80 degrees and 82 degrees

fastener length between 0.46in. and 0.437in. ⁓7/16 minimum tensile strength 60000 pounds per square inch

thread length 0.292in. ⁓19/64 head diameter between 0.257 inches and 0.279 inches

overall length 1.35in. ⁓1-23/64

fastener length between 0.281in. and 0.312in. ⁓5/16 countersink angle between 80 degrees and 82 degrees

thread length 0.167in. ⁓11/64 countersink angle between 80 degrees and 82 degrees

fastener length 0.5in. ⁓1/2 minimum tensile strength 60000 pounds per square inch

thread length 0.371in. ⁓3/8 countersink angle between 80 degrees and 82 degrees

nominal length 2.5 inches 1st end opening pressure setting 9.5 pounds per square inch

cres ams5510; 0.12 min 0.13 max in. thk matl

thread length 0.75in. ⁓3/4 head diameter between 0.67 inches and 0.78 inches

thread length 0.625in. ⁓5/8 head height between 0.237in. and 0.256in. ⁓17/64

thread length 0.5in. ⁓1/2 head diameter between 0.67 inches and 0.78 inches

inertial n retainer nsn 6605000133140.

nominal thread diameter 0.312in. ⁓5/16 fastener length 2.75in. ⁓2-3/4

breach chamber nsn 2995000133133.

thread length 1.75in. ⁓1-3/4 head diameter between 0.557 inches and 0.59 inches

aluminum alloy ams 5540 0.015 in. min 0.02 in. max wall thk 6.923 in. min 6.953 in. max lg center hole to center

adapter nsn 2995000133124.

thread length between 2in. ⁓2-1/64 head height between 0.198in. and 0.216in. ⁓7/32

clamp nsn 4730000132978.

maximum discharge flow rate 50 gallons per minute operating speed at rated capacity 7300 revolutions per minute

tf33 engine

fastener length 0.625in. ⁓5/8 head height between 0.17in. and 0.12in. ⁓1/8

thread length 0.625in. ⁓5/8 head diameter between 0.287 inches and 0.39 inches

thread length between 1.688in. and 1.75in. ⁓1-3/4 head diameter between 0.24 inches and 0.26 inches

pilot nsn 5120000132738.

driver assembly

thread length 0.437in. ⁓7/16 head diameter between 0.287 inches and 0.39 inches

thread length between 1.438in. and 1.5in. ⁓1-1/2 head diameter between 0.24 inches and 0.26 inches

thread length 1.25in. ⁓1-1/4 head height between 0.091in. and 0.13in. ⁓9/64

thread length between 0.5in. ⁓1/2 head diameter between 0.59 inches and 0.622 inches

pulse generator nsn 6625000132585.

copper core conductor all conductors

printed cable assy nsn 6605000132571.

thread length between 0.75in. ⁓3/4 head height between 0.194in. and 0.211in. ⁓7/32

thread length between 0.5in. ⁓1/2 head diameter between 0.49 inches and 0.518 inches

fastener length 1in. ⁓1/64 nominal thread diameter 0.19in. (uts #10)

thread length between 0.438in. ⁓29/64 head height between 0.118in. and 0.13in. ⁓9/64

fastener length 0.5in. ⁓1/2 head diameter between 0.28 inches and 0.226 inches

prin cable assembly nsn 5995000132442.

overall height 3.25 inches pressure rating 3000 pounds per square inch

aluminum material

oil seal nsn 5330000141365.

thread length 0.25in. ⁓1/4 head height between 0.12in. and 0.113in. ⁓1/8