Temp range minus 70.0 degrees to plus 125.0 degrees c; pickup voltage 18.0 vdc max; hold voltage 7.0 vdc; drop-out voltage 1.5 vdc min; coil current 0.11 amp max; terminal strength 5.0 lbs ; pins are underplated (except polarizing pin is tinned) prior to gold plating (per mil-g-45204, type ii, class i) with nickel 50.000 to 150.000 microinches thick; pins are 0.062 inch diameter and 0.270 inch length with exception of polarizing pin which is 0.300 inch length; 0.050 inch thickness silicone rubber gasket per ams 3332, with shore hardness of 20, is located against bottom of case and at base of pins
No other part numbers with same form, fit, and function found.
1.780 inches overall length, 1.062 inches single mounting facility center to center distance between mounting facilities parallel to length
1.780 inches overall length, 1.062 inches single mounting facility center to center distance between mounting facilities parallel to length
Riveted on mounting configuration
2b single mounting facility thread class, 1.680 inches overall length, 1.680 inches overall height, 1.000 inches overall width
Steel case material, nickel case surface treated, explosion proof environmental protection, intermittent duty type, 30.0 dc voltage rating in volts
2a single mounting facility thread class, 4.250 inches overall length, 2.625 inches single mounting facility center to center distance between mounting facilities parallel to length
NSN 5998-01-580-0758
NSN 6110-00-578-7243
NSN 5985-01-085-1602
NSN 5915-00-795-7220
NSN 5905-00-374-8083
NSN 6110-01-510-2538
NSN 5910-00-515-3586
NSN 6320-00-393-0138
NSN 6145-00-435-4013
NSN 5855-01-046-7273
NSN 5855-00-797-8217
NSN 5965-00-752-5823
Last Updated: 04/28/2024