Product Features
Failure rate 1.0 percent per 10, 000 cycles
Detail Specifications
Overall Length:
1.062 inches
Center To Center Distance Between Mounting Facilities Parallel To Length:
0.840 inches single mounting facility and 0.860 inches single mounting facility
Overall Height:
0.470 inches
Overall Width:
0.310 inches
Environmental Protection:
Hermetic
Unthreaded Mounting Hole Diameter:
0.091 inches single mounting facility and 0.101 inches single mounting facility
Fragility Factor:
Moderately rugged
Purpose For Which Designed:
General
Winding Dc Resistance Rating:
1.2 kilohms single winding and 1.5 kilohms single winding
Arc Quenching Method:
Air
Mounting Facility Type And Quantity:
2 unthreaded hole single mounting facility
Storage Type:
General purpose warehouse
Cubic Measure:
0.155 cubic inches
Mounting Facility Pattern:
In-line single mounting facility
Nonpile-up Main Contact Arrangement:
2 pole, double throw, one position momentary
Criticality Code Justification:
Feat
Time Delay:
0.004 seconds fixed operate and release time
Operating Voltage Rating And Type At Specificationified Temp:
26.5 volts dc 25 degrees celsius single winding
Main Contact Load Current Rating At Maximum Rated Voltage:
300.0 milliamperes dc inductive load
Main Contact Load Current Rating At Maximum Rated Voltage:
100.0 milliamperes dc lamp load
Main Contact Load Current Rating At Maximum Rated Voltage:
125.0 milliamperes ac resistive load and 2.0 amperes dc resistive load
Main Contact Maximum Voltage Rating In Volts:
115.0 ac and 28.0 dc
Test Data Document:
81349-mil-r-39016 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
8 wire hook all functions
Specification Data:
81349-mil-r-39016/13 government specification
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
