Technical Specifications of NSN
Body Style:
Cylindrical servo mounted
Pilot Diameter:
1.87450 inches
Pilot Length:
0.06200 inches
Overall Length:
1.582 inches
Undercut Diameter:
1.87500 inches
Undercut Width:
0.07300 inches
Body Diameter:
1.437 inches
Shaft Diameter:
Between 0.2494 inches and 0.2497 inches
Shaft Length:
0.562 inches
Body Length:
1.020 inches
Overall Diameter:
2.005 inches
Mounting Lip Diameter:
1.99750 inches
Mounting Lip Depth:
0.06200 inches
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
357.0
Maximum Starting Torque:
2.00 inch-ounces
Shaft Runout:
0.001 inches
Lateral Runout:
0.002 inches
Pilot Diameter Runout:
0.00100 inches
Shaft Radial Play:
0.003 inches
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Clamp ring
Electrical Resistance Per Section:
10.000 kilohms single section
Rotary Actuator Travel In Angular Deg:
360.0
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-400.0/+400.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-400.0 to 400.0 single section
Power Dissipation Rating Per Section In Watts:
1.5 free air single section
Function Conformity Per Section:
Single section independent linearity
Fixed Tap Quantity Per Section:
1 single section
Tap Location Tolerance Per Section:
-0.5/+0.5 ohms single section
Tap Location Tolerance Per Section:
-0.5 to 0.5 ohms single section
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 single section
Actuator Travel Control Feature:
Continuous motion
Tap Location From Ccw Terminal Per Section In Ohms:
5000.0 single section
Function Characteristic Per Section:
Single section linear
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
80.0 single section
Test Data Document:
18876-10179966 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Item Name:
Potentiometer,cermet
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
