Product Technical Spec.
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
Between 0.7495 inches and 0.7500 inches
Pilot Length:
Between 0.0570 inches and 0.0670 inches
Terminal Length:
0.125 inches
Undercut Diameter:
Between 0.740 inches and 0.750 inches
Undercut Width:
Between 0.0570 inches and 0.0670 inches
Body Diameter:
Between 0.870 inches and 0.880 inches
Shaft Diameter:
Between 0.1245 inches and 0.1248 inches
Shaft Length:
Between 1.559 inches and 1.621 inches
Body Length:
Between 0.490 inches and 0.500 inches
Mounting Lip Diameter:
Between 0.7495 inches and 0.7500 inches
Mounting Lip Depth:
Between 0.0570 inches and 0.0670 inches
Actuator Type:
Double ended shaft
Effective Electrical Rotation In Deg Angular Rotation:
351.0
Maximum Starting Torque:
0.27 inch-ounces
Maximum Running Torque:
0.27 inch-ounces
Shaft End Play:
0.005 inches
Shaft Runout:
0.001 inches
Lateral Runout:
0.002 inches
Pilot Diameter Runout:
0.001 inches
Shaft Radial Play:
0.001 inches
Fragility Factor:
Moderately rugged
Terminal Location:
Front end
Mounting Method:
Clamp ring
Features Provided:
Humidity proof
Cubic Measure:
0.221 cubic inches
Electrical Resistance Per Section:
6.0 kilohms single section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation:
336.0 single section
Rotary Actuator Travel In Angular Deg:
360.0
Function Conformity Tolerance Per Section:
-0.15/+0.15 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 single section
Power Dissipation Rating Per Section In Watts:
1.0 free air single section
Function Conformity Per Section:
Single section independent linearity
Fixed Tap Quantity Per Section:
1 single section
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 single section
Actuator Travel Control Feature:
Continuous motion
Function Characteristic Per Section:
Single section linear
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
70.0 single section
Test Data Document:
89305-484830 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
4 turret
Item Name:
Pot,nonwire Wound
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
