Product Features
0.033 in. Diameter through hole 0.156 in. From shaft end
Product Technical Spec.
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
1.8750 inches
Pilot Length:
0.0670 inches
Undercut Diameter:
1.870 inches
Undercut Width:
0.0550 inches
Body Diameter:
2.005 inches
Shaft Diameter:
0.250 inches
Shaft Length:
0.750 inches
Body Length:
1.050 inches
Mounting Lip Diameter:
2.0050 inches
Mounting Lip Depth:
0.0550 inches
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
180.0
Maximum Starting Torque:
1.00 inch-ounces
Maximum Running Torque:
1.00 inch-ounces
Shaft Runout:
0.001 inches
Lateral Runout:
0.002 inches
Pilot Diameter Runout:
0.001 inches
Terminal Location:
Radially positioned over more than half the circumference
Mounting Method:
Clamp ring
Features Provided:
Humidity proof
Electrical Resistance Per Section:
500.0 ohms single section
Rotary Actuator Travel In Angular Deg:
360.0
Function Conformity Tolerance Per Section:
-0.50/+0.50 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
150.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-400.0/+400.0 single section
Power Dissipation Rating Per Section In Watts:
4.0 free air single section
Function Conformity Per Section:
Single section absolute conformity
Fixed Tap Quantity Per Section:
1 single section
Tap Location Tolerance Per Section:
-20.0/+0.0 ohms single section
Resistance Tolerance Per Section In Percent:
-20.0/+0.0 single section
Actuator Travel Control Feature:
Continuous motion
Tap Location From Ccw Terminal Per Section In Ohms:
250.0 single section
Function Characteristic Per Section:
Single section graph
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
25.0 single section
Test Data Document:
19200-1054539 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
4 turret
Item Name:
Potentiometer,conductive Plastic
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
