Product Technical Spec.
Body Style:
Cylindrical bushing mounted
Reliability Indicator:
Not established
Overall Length:
1.469 inches
First Flat Length:
0.438 inches
Flat Height:
0.094 inches
Body Diameter:
0.500 inches
Shaft Diameter:
0.125 inches
Shaft Length:
0.750 inches
Mounting Bushing Length:
0.250 inches
Body Length:
0.594 inches
Overall Diameter:
1.376 inches
Shaft Style:
Round, flatted
Switch Voltage Rating In Volts:
125.0 and 28.0
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
248.0
Maximum Starting Torque:
4.50 inch-ounces
Maximum Running Torque:
4.50 inch-ounces
Maximum Stop Torque:
64.00 inch-ounces
Nonturn Device Location:
At 9 oclock
Nonturn Device Radius:
0.245 inches
Mechanical Backlash In Deg Angular Rotation:
3.0
Switch Operating Position:
Start of rotation
Switch Contact Arrangement:
Single pole, single throw, normally open, both positions maintained
Screw Thread Diameter:
0.250 inches
Screw Thread Series Designator:
Unef
Screw Thready Qty Per Inch (tpi):
32.0
Terminal Location:
Rear-bottom
Mounting Method:
Standard bushing
Features Provided:
Panel seal and switch
Electrical Resistance Per Section:
2.000 percent, rated amperes c and better flooring
Rotary Actuator Travel In Angular Deg:
295.0
Resistance Tempurature Characteristic Range Per Section In Percent:
+0.0/+7.0 -55 degrees celsius single section and +0.0/+3.5 -25 degrees celsius single section and -2.5/+2.5 85 degrees celsius single section and +0.0/+5.5 120 degrees celsius single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
100.0 single section
Power Dissipation Rating Per Section In Watts:
0.5 7th secondary quality
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 single section
Actuator Travel Control Feature:
Stops
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
70.0 single section
Switch Current Type And Rating In Amps:
0.500 ac and 1.500 dc
Standard Taper Curve Per Section:
A single section
Test Data Document:
09344-pc70086 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
5 tab, solder lug
Item Name:
Resistor,variable,conductive Plastic
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
GS1T048F202UC
Part Number:
GS1T048F202UC
