Product Technical Spec.
Body Style:
Cylindrical bushing mounted
Reliability Indicator:
Not established
Overall Length:
2.047 inches
Body Diameter:
1.120 inches
Shaft Diameter:
0.250 inches
Shaft Length:
0.370 inches
Mounting Bushing Length:
0.380 inches
Body Length:
1.265 inches
Overall Diameter:
1.370 inches
Shaft Bearing Type:
Bearing
Switch Voltage Rating In Volts:
28.0
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
Between 180.0 and 220.0
Maximum Starting Torque:
15.00 inch-ounces
Maximum Running Torque:
6.00 inch-ounces
Maximum Stop Torque:
128.00 inch-ounces
Nonturn Device Location:
At 6 oclock
Nonturn Device Radius:
0.437 inches
Shaft End Play:
0.001 inches
Shaft Runout:
0.001 inches
Lateral Runout:
0.001 inches
Pilot Diameter Runout:
0.001 inches
Shaft Radial Play:
0.001 inches
Switch Operating Position:
Start of rotation
Switch Contact Arrangement:
Single pole, single throw, normally open, both positions maintained
Screw Thread Diameter:
0.375 inches
Screw Thread Series Designator:
Unef
Screw Thready Qty Per Inch (tpi):
32.0
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Standard bushing and clamp ring
Features Provided:
Switch
Electrical Resistance Per Section:
2.0 kilohms all sections
Rotary Actuator Travel In Angular Deg:
Between 180.0 and 220.0
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 all sections
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-20.0/+20.0 all sections
Power Dissipation Rating Per Section In Watts:
2.0 free air all sections
Fixed Tap Quantity Per Section:
1 all sections
Tap Location Tolerance Per Section:
-10.0/+10.0 ohms all sections
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 all sections
Actuator Travel Control Feature:
Spring
Tap Location From Ccw Terminal Per Section In Ohms:
1000.0 all sections
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
60.0 all sections
Switch Current Type And Rating In Amps:
0.250 dc
Standard Taper Curve Per Section:
A all sections
Test Data Document:
10001-2890904 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
6 turret
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
