Product Technical Spec.
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
Between 2.8740 inches and 2.8750 inches
Pilot Length:
0.0620 inches
Undercut Diameter:
0.813 inches
Undercut Width:
0.0730 inches
Body Diameter:
3.000 inches
Shaft Diameter:
0.250 inches
Shaft Length:
Between 0.594 inches and 0.696 inches
Body Length:
1.188 inches
Mounting Lip Diameter:
3.0000 inches
Mounting Lip Depth:
0.0930 inches
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
358.0
Maximum Starting Torque:
4.30 inch-ounces
Maximum Running Torque:
3.20 inch-ounces
Shaft End Play:
0.00500 inches
Shaft Runout:
0.001 inches
Lateral Runout:
0.010 inches
Pilot Diameter Runout:
0.00150 inches
Shaft Radial Play:
0.002 inches
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Clamp ring
Electrical Resistance Per Section:
50.000 kilohms all sections
Rotary Actuator Travel In Angular Deg:
360.0
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
85.0 all sections
Power Dissipation Rating Per Section In Watts:
5.0 free air all sections
Resistance Tolerance Per Section In Percent:
-5.0/+5.0 all sections
Resistance Tolerance Per Section In Percent:
-5.0 to 5.0 all sections
Actuator Travel Control Feature:
Continuous motion
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius:
-20.0/+20.0 all sections
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius:
-20.0 to 20.0 all sections
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
40.0 all sections
Standard Taper Curve Per Section:
A all sections
Terminal Type And Quantity:
18 tab, solder lug
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
