Product Features
Three variables mounted in steel bracket
Product Technical Spec.
Body Style:
Cylindrical bushing mounted
Reliability Indicator:
Not established
First Flat Length:
Between 0.312 inches and 0.375 inches
Flat Height:
0.188 inches
Body Diameter:
3.000 inches
Shaft Diameter:
Between 0.219 inches and 0.281 inches
Shaft Length:
1.125 inches
Mounting Bushing Length:
Between 0.594 inches and 0.656 inches
Body Length:
Between 6.281 inches and 6.344 inches
Shaft Style:
Round, flatted
Shaft Bearing Type:
Bearing
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
Between 295.0 and 305.0
Maximum Starting Torque:
64.00 inch-ounces
Maximum Running Torque:
40.00 inch-ounces
Maximum Stop Torque:
240.00 inch-ounces
Fragility Factor:
Moderately rugged
Screw Thread Diameter:
0.375 inches and 0.164 inches
Screw Thread Series Designator:
Unef and unc
Screw Thready Qty Per Inch (tpi):
32.0
Mounting Facility Quantity:
4
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Standard bushing and threaded hole
Features Provided:
Panel seal
Cubic Measure:
45.400 cubic inches
Electrical Resistance Per Section:
2.5 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section:
2.5 percent, rated amperes c and better select
Electrical Resistance Per Section:
45.0 ohms c and better finish
Rotary Actuator Travel In Angular Deg:
Between 295.0 and 305.0
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
340.0 all sections
Power Dissipation Rating Per Section In Watts:
25.0 7th secondary grams
Power Dissipation Rating Per Section In Watts:
25.0 7th secondary pattern
Power Dissipation Rating Per Section In Watts:
50.0 7th secondary finish
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 all sections
Actuator Travel Control Feature:
Stops
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
25.0 all sections
Standard Taper Curve Per Section:
N 1st section
Standard Taper Curve Per Section:
L 2nd section
Standard Taper Curve Per Section:
L 3rd section
Test Data Document:
06481-914107 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
9 tab, solder lug
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
