Product Technical Spec.
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
Between 1.8740 inches and 1.8750 inches
Pilot Length:
0.0620 inches
Undercut Diameter:
Between 1.874 inches and 1.875 inches
Undercut Width:
0.0620 inches
Body Diameter:
2.000 inches
Angle Of Mounting Hole In Deg:
90.0
Angle Between Centerlines Of Mounting Holes In Deg:
120.0
Shaft Diameter:
Between 0.2494 inches and 0.2497 inches
Shaft Length:
Between 0.605 inches and 0.645 inches
Body Length:
Between 0.953 inches and 0.983 inches
Mounting Lip Diameter:
2.0000 inches
Mounting Lip Depth:
0.0620 inches
Mounting Hole/stud Circle Diameter:
1.250 inches
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
355.0
Screw Thread Diameter:
0.164 inches
Screw Thread Series Designator:
Unc
Screw Thready Qty Per Inch (tpi):
32.0
Mounting Facility Quantity:
3
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Clamp ring and threaded hole
Electrical Resistance Per Section:
10.0 kilohms all sections
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation:
162.5 2nd section
Rotary Actuator Travel In Angular Deg:
360.0
Function Conformity Tolerance Per Section:
-0.50/+0.50 all sections
Power Dissipation Rating Per Section In Watts:
5.5 free air all sections
Function Conformity Per Section:
All sections absolute conformity
Fixed Tap Quantity Per Section:
1 2nd section
Tap Location Tolerance Per Section:
-1.0/+1.0 degrees angular rotation 2nd section
Resistance Tolerance Per Section In Percent:
-5.0/+5.0 all sections
Actuator Travel Control Feature:
Continuous motion
Function Characteristic Per Section:
All sections equation
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
25.0 all sections
Test Data Document:
10001-1289299 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
7 turret
Item Name:
Pot,wire Wound
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
