Detail Specifications
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
Between 1.31200 inches and 1.31250 inches
Pilot Length:
0.06200 inches
Overall Length:
Between 2.541 inches and 2.603 inches
Terminal Length:
0.281 inches
Undercut Diameter:
1.312 inches
Undercut Width:
0.07300 inches
Body Diameter:
Between 1.432 inches and 1.442 inches
Shaft Diameter:
0.187 inches
Shaft Length:
Between 0.641 inches and 0.703 inches
Body Length:
1.900 inches
Overall Diameter:
Between 1.716 inches and 1.721 inches
Mounting Lip Diameter:
Between 1.43200 inches and 1.44200 inches
Mounting Lip Depth:
0.09300 inches
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
340.0
Maximum Starting Torque:
0.80 inch-ounces
Maximum Running Torque:
0.80 inch-ounces
Shaft End Play:
0.00600 inches
Shaft Runout:
0.001 inches
Lateral Runout:
0.002 inches
Pilot Diameter Runout:
0.00100 inches
Shaft Radial Play:
0.002 inches
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Clamp ring
Electrical Resistance Per Section:
10.000 percent, rated amperes c and better finish
Electrical Resistance Per Section:
10.000 percent, rated amperes c and better industrial clears
Rotary Actuator Travel In Angular Deg:
360.0
Function Conformity Tolerance Per Section:
-1.00/+1.00 all sections
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-20.0/+20.0 single section
Power Dissipation Rating Per Section In Watts:
2.0 free air single section
Function Conformity Per Section:
Single section independent linearity
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 all sections
Actuator Travel Control Feature:
Continuous motion
Function Characteristic Per Section:
Single section equation
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
25.0 single section
Test Data Document:
10001-2557878 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
3 turret
Item Name:
Potentiometer,wire Wound
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC