Detail Specifications
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Pilot Length:
Between 0.0570 inches and 0.0670 inches
Overall Length:
Between 1.907 inches and 1.989 inches
Undercut Diameter:
Between 0.6245 inches and 0.625 inches
Undercut Width:
Between 0.0630 inches and 0.0730 inches
Body Diameter:
Between 0.870 inches and 0.880 inches
Shaft Diameter:
Between 0.1245 inches and 0.1248 inches
Shaft Length:
Between 0.344 inches and 0.406 inches
Body Length:
Between 1.563 inches and 1.583 inches
Overall Diameter:
Between 1.026 inches and 1.068 inches
Mounting Lip Diameter:
Between 0.8700 inches and 0.8800 inches
Mounting Lip Depth:
Between 0.0570 inches and 0.0670 inches
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
3600.0
Maximum Starting Torque:
0.40 inch-ounces
Maximum Running Torque:
0.30 inch-ounces
Maximum Stop Torque:
100.00 inch-ounces
Shaft End Play:
0.00500 inches
Shaft Runout:
0.002 inches
Pilot Diameter Runout:
0.00200 inches
Shaft Radial Play:
0.002 inches
Terminal Location:
Longitudinally positioned on the circumference
Mounting Method:
Clamp ring
Electrical Resistance Per Section:
11.250 kilohms single section
Rotary Actuator Travel In Angular Deg:
3600.0
Function Conformity Tolerance Per Section:
-0.25/+0.25 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
105.0 single section
Power Dissipation Rating Per Section In Watts:
3.0 free air single section
Function Conformity Per Section:
Single section independent linearity
Resistance Tolerance Per Section In Percent:
-3.0/+3.0 single section
Actuator Travel Control Feature:
Stops
Function Characteristic Per Section:
Single section linear
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
40.0 single section
Test Data Document:
13499-381-1848-010 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
3 tab, solder lug
Item Name:
Resistor,sinusoidal
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
381-1848-010
