Product Technical Spec.
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
0.9688 inches
Pilot Length:
0.0620 inches
Overall Length:
1.096 inches
Undercut Diameter:
0.9688 inches
Undercut Width:
0.0620 inches
Body Diameter:
1.067 inches
Shaft Diameter:
0.1248 inches
Shaft Length:
0.562 inches
Body Length:
0.753 inches
Overall Diameter:
1.203 inches
Mounting Lip Diameter:
1.0670 inches
Mounting Lip Depth:
0.0620 inches
Undercut Diameter:
0.090 inches
Shaft Style:
Round, stepped
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
360.0
Maximum Starting Torque:
0.50 inch-ounces
Maximum Running Torque:
0.50 inch-ounces
Shaft End Play:
0.00250 inches
Shaft Runout:
0.001 inches
Lateral Runout:
0.0015 inches
Pilot Diameter Runout:
0.00150 inches
Shaft Radial Play:
0.002 inches
Undercut Length:
0.438 inches
Terminal Location:
Rear end
Mounting Method:
Clamp ring
Electrical Resistance Per Section:
24.000 kilohms single section
Rotary Actuator Travel In Angular Deg:
360.0
Function Conformity Tolerance Per Section:
-1.00/+1.00 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-50.0/+50.0 single section
Power Dissipation Rating Per Section In Watts:
3.0 free air single section
Function Conformity Per Section:
Single section independent linearity
Fixed Tap Quantity Per Section:
24 single section
Tap Location Tolerance Per Section:
-2.0/+2.0 degrees angular rotation single section
Resistance Tolerance Per Section In Percent:
-0.0/+0.0 single section
Actuator Travel Control Feature:
Continuous motion
Function Characteristic Per Section:
Single section linear
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
65.0 single section
Test Data Document:
97424-5839k79 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
25 wire lead
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
