Product Technical Spec.
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
1.3125 inches
Pilot Length:
0.0620 inches
Overall Length:
2.060 inches
First Flat Length:
0.350 inches
Flat Height:
0.230 inches
Undercut Diameter:
1.285 inches
Undercut Width:
0.0730 inches
Body Diameter:
1.437 inches
Shaft Diameter:
0.250 inches
Shaft Length:
1.090 inches
Body Length:
0.970 inches
Overall Diameter:
1.625 inches
Mounting Lip Diameter:
1.4370 inches
Mounting Lip Depth:
0.0620 inches
Shaft Style:
Round, wedge flatted
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
354.0
Maximum Starting Torque:
0.60 inch-ounces
Maximum Running Torque:
0.40 inch-ounces
Maximum Stop Torque:
480.00 inch-ounces
Shaft End Play:
0.004 inches
Shaft Runout:
0.001 inches
Lateral Runout:
0.002 inches
Pilot Diameter Runout:
0.0015 inches
Shaft Radial Play:
0.002 inches
Fragility Factor:
Moderately rugged
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Clamp ring
Electrical Resistance Per Section:
5.0 kilohms single section
Rotary Actuator Travel In Angular Deg:
330.0
Function Conformity Tolerance Per Section:
-0.50/+0.50 single section
Function Conformity Tolerance Per Section:
-0.50 to 0.50 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-850.0/+850.0 single section
Power Dissipation Rating Per Section In Watts:
3.0 free air single section
Function Conformity Per Section:
Single section independent linearity
Resistance Tolerance Per Section In Percent:
-3.0/+3.0 single section
Actuator Travel Control Feature:
Stops
Function Characteristic Per Section:
Single section linear
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
60.0 single section
Test Data Document:
10001-2664917 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
3 turret
Item Name:
Resistor,variable,sine Cosine
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
