Product Technical Spec.
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
0.3750 inches
Pilot Length:
0.0620 inches
Undercut Diameter:
0.378 inches
Undercut Width:
0.0570 inches
Body Diameter:
0.500 inches
Shaft Diameter:
0.1249 inches
Shaft Length:
0.500 inches
Body Length:
0.520 inches
Mounting Lip Diameter:
0.5000 inches
Mounting Lip Depth:
0.0620 inches
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
331.0
Maximum Starting Torque:
0.15 inch-ounces
Maximum Running Torque:
0.15 inch-ounces
Shaft End Play:
0.005 inches
Shaft Runout:
0.001 inches
Lateral Runout:
0.001 inches
Pilot Diameter Runout:
0.001 inches
Shaft Radial Play:
0.002 inches
Mechanical Backlash In Deg Angular Rotation:
0.5
Terminal Location:
Rear end
Mounting Method:
Clamp ring
Electrical Resistance Per Section:
8.0 kilohms single section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation:
165.5 single section
Rotary Actuator Travel In Angular Deg:
331.0
Function Conformity Tolerance Per Section:
-1.00/+1.00 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
105.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-0.100/+0.100 single section
Power Dissipation Rating Per Section In Watts:
0.7 free air single section
Function Conformity Per Section:
Single section independent linearity
Fixed Tap Quantity Per Section:
1 single section
Tap Location Tolerance Per Section:
-5.0/+5.0 degrees angular rotation single section
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 single section
Actuator Travel Control Feature:
Stops
Function Characteristic Per Section:
Single section linear
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
25.0 single section
Test Data Document:
31442-8478a36 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
4 binding post
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
