Product Technical Spec.
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
1.0300 inches
Pilot Length:
0.0620 inches
Overall Length:
4.137 inches
Undercut Diameter:
1.000 inches
Undercut Width:
0.0620 inches
Body Diameter:
1.130 inches
Shaft Diameter:
0.125 inches
Shaft Length:
0.500 inches
Body Length:
3.621 inches
Overall Diameter:
1.315 inches
Mounting Lip Diameter:
1.0930 inches
Mounting Lip Depth:
0.0620 inches
Actuator Type:
Single shaft
Maximum Starting Torque:
1.50 inch-ounces
Shaft Runout:
0.001 inches
Lateral Runout:
0.001 inches
Shaft Radial Play:
0.008 inches
Fragility Factor:
Moderately rugged
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Clamp ring
Electrical Resistance Per Section:
20.0 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section:
20.0 percent, rated amperes c and better select
Electrical Resistance Per Section:
4.0 percent, rated amperes c and better finish
Electrical Resistance Per Section:
40.0 percent, rated amperes c and better v.G. Stepping
Electrical Resistance Per Section:
80.0 percent, rated amperes c drop siding
Rotary Actuator Travel In Angular Deg:
360.0
Function Conformity Tolerance Per Section:
-1.00/+1.00 2nd section
Function Conformity Tolerance Per Section:
-1.00/+1.00 3rd section
Function Conformity Tolerance Per Section:
-1.50/+1.50 1st section
Function Conformity Tolerance Per Section:
-1.50/+1.50 4th section
Function Conformity Tolerance Per Section:
-1.50/+1.50 5th section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-40.0/+40.0 all sections
Power Dissipation Rating Per Section In Watts:
0.1 free air all sections
Function Conformity Per Section:
All sections proportional conformity
Resistance Tolerance Per Section In Percent:
-5.0/+5.0 all sections
Actuator Travel Control Feature:
Continuous motion
Function Characteristic Per Section:
All sections table
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
71.0 all sections
Test Data Document:
20418-es2205 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
26 turret
Item Name:
Resistor,variable,sine Cosine
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
