When fully seated, connector is 1/16" away from nut (max); connector requires 6 full turns to be fully engaged; in order for the eec control system to work properly both terminating resistors must be attached at both ends of the canbus network; one will be imstalled at the control head & the other at the control processor; 2 terminating resistors must be installed in every canbus system
No other part numbers with same form, fit, and function found.
NSN 5855-01-657-7657
NSN 5935-01-435-6574
NSN 5975-00-896-7612
NSN 6135-01-247-5660
NSN 6220-01-401-5337
NSN 6110-01-346-1964
NSN 5999-01-600-0443
NSN 6110-00-766-0886
NSN 6105-00-765-5644
NSN 2925-01-231-6312
NSN 5915-01-465-2107
NSN 5990-01-510-4699
Last Updated: 05/03/2024