Product Technical Spec.
Thread Class:
2a single mounting facility
Thread Length:
0.417 inches single mounting facility and 0.457 inches single mounting facility
Hazardous Locations/environmental Protection:
Explosion proof
Overall Length:
Between 2.709 inches and 2.789 inches
First Flat Length:
0.250 inches single actuator
Flat Height:
0.214 inches single actuator
Shaft Diameter:
0.248 inches single actuator and 0.251 inches single actuator
Shaft Length:
0.834 inches single actuator and 0.914 inches single actuator
Overall Diameter:
1.150 inches
Individual Section Quantity:
3
Nonturn Device Type:
Slotted bushing at 3: 00 o'clock
Operating Tempurature Range:
-55.0/+125.0 degrees celsius
Operating Tempurature Range:
-55.0 to 125.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
2 each section front
Throw Quantity:
4 each section rear
Mounting Method:
Threaded bushing single mounting facility
Thread Size:
0.375 inches single mounting facility
Contact Voltage Rating In Volts:
115.0 ac at sea level
Contact Voltage Rating In Volts:
28.0 dc at sea level
Shaft Flat/slot Angular Location:
180.0 degrees from contact position 1 single actuator
Rotor Through Connection Quantity:
2 each section
Switch Actuator Indexing Position Quantity:
4 single actuator
Shaft Type:
Round, flatted single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Breaks before makes 1st section rear
Contact Switching Action:
Breaks before makes 2nd section rear
Contact Switching Action:
Makes before breaks 3rd section rear
Switch Actuator Positioning Increment:
45.0 degrees single actuator
Detent Rotational Torque Range:
+0.700/+5.000 inch-pounds single actuator
Detent Rotational Torque Range:
+0.700 to 5.000 inch-pounds single actuator
Switch Actuator Stop Device Type:
Fixed stop single actuator
Contact Load Current Rating:
5.0 amperes resistive load ac at sea level
Contact Load Current Rating:
5.0 amperes resistive load dc at sea level and 2.5 amperes inductive load dc at sea level
Style Designator:
Tap, circular, bushing mount
Test Data Document:
81349-mil-s-3786/4 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator:
Unef single mounting facility
Item Name:
Non-illuminated Selector Switch
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
