Product Technical Spec.
Thread Class:
2a single mounting facility
Thread Length:
0.375 inches single mounting facility
Overall Length:
2.750 inches
Overall Height:
1.000 inches
Overall Width:
0.937 inches
First Flat Length:
0.250 inches single actuator
Flat Height:
0.214 inches single actuator and 0.218 inches single actuator
Shaft Diameter:
0.247 inches single actuator and 0.250 inches single actuator
Shaft Length:
0.750 inches single actuator
Nonturn Device Radius:
0.375 inches at 3: 00 o'clock
Individual Section Quantity:
3
Nonturn Device Type:
Tab at 3: 00 o'clock
Operating Tempurature Range:
-65.0/+85.0 degrees celsius
Operating Tempurature Range:
-65.0 to 85.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
3 each section rear
Throw Quantity:
2 each section rear
Mounting Method:
Threaded bushing single mounting facility
Thread Size:
0.375 inches single mounting facility
Contact Voltage Rating In Volts:
28.0 dc at sea level
Switch Actuator Momentary Position:
Clockwise single actuator
Shaft Flat/slot Angular Location:
180.0 degrees from contact position 1 single actuator
Switch Actuator Indexing Position Quantity:
2 single actuator
Shaft Type:
Round, flatted single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Breaks before makes each section rear
Switch Actuator Positioning Increment:
30.0 degrees single actuator
Detent Rotational Torque Range:
+0.700/+6.000 inch-pounds single actuator
Detent Rotational Torque Range:
+0.700 to 6.000 inch-pounds single actuator
Switch Actuator Stop Device Type:
Fixed stop single actuator
Contact Load Current Rating:
1.0 amperes resistive load dc at sea level
Style Designator:
Circular wafer, bushing mount
Test Data Document:
81349-mil-s-3786/5 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator:
Unef single mounting facility
Item Name:
Switch,firing,rack Assembly
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
