Product Features
Sect. 1 rear has 1 dummy terminal, sect. 2 rear has 1 dummy terminal, sect. 3 rear has 2 dummy terminals
Detail Specifications
Thread Class:
2a single mounting facility
Thread Length:
0.360 inches single mounting facility and 0.400 inches single mounting facility
Overall Length:
Between 2.398 inches and 2.438 inches
First Flat Length:
0.290 inches single actuator and 0.330 inches single actuator
Flat Height:
0.213 inches single actuator and 0.223 inches single actuator
Shaft Diameter:
0.248 inches single actuator and 0.250 inches single actuator
Shaft Length:
0.730 inches single actuator and 0.770 inches single actuator
Overall Diameter:
Between 1.248 inches and 1.250 inches
Nonturn Device Radius:
0.510 inches at 3: 00 o'clock and 0.550 inches at 3: 00 o'clock
Individual Section Quantity:
3
Nonturn Device Type:
Tab at 3: 00 o'clock
Operating Tempurature Range:
-25.0 to 85.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
1 1st section rear
Pole Quantity:
1 2nd section rear
Pole Quantity:
2 3rd section rear
Throw Quantity:
10 1st section rear
Throw Quantity:
10 2nd section rear
Throw Quantity:
4 3rd section rear
Mounting Method:
Threaded bushing single mounting facility
Thread Size:
0.375 inches single mounting facility
Contact Voltage Rating In Volts:
110.0 ac at sea level
Contact Voltage Rating In Volts:
28.0 dc at sea level
Shaft Flat/slot Angular Location:
225.0 degrees from nonturn device single actuator
Switch Actuator Indexing Position Quantity:
10 single actuator
Shaft Type:
Round, flatted single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Breaks before makes each section rear
Switch Actuator Positioning Increment:
30.0 degrees single actuator
Switch Actuator Stop Device Type:
Fixed stop single actuator
Contact Load Current Rating:
2.0 amperes resistive load dc at sea level
Contact Load Current Rating:
1.0 amperes resistive load ac at sea level
Style Designator:
Circular wafer, bushing mount
Test Data Document:
80063-smc423132 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Thread Series Designator:
Unef single mounting facility
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
