Detail Specifications
Thread Class:
2a 1st mounting facility
Thread Class:
2b 2nd mounting facility
Thread Length:
0.375 inches single mounting facility
Overall Length:
Between 1.907 inches and 1.937 inches
Overall Height:
Between 1.734 inches and 1.766 inches
Overall Width:
Between 1.734 inches and 1.766 inches
Shaft Diameter:
0.249 inches single actuator and 0.251 inches single actuator
Shaft Length:
0.750 inches single actuator
Unthreaded Mounting Hole Diameter:
0.138 inches single mounting facility
Nonturn Device Radius:
0.490 inches at 12: 00 o'clock and 0.510 inches at 12: 00 o'clock
Individual Section Quantity:
1
Nonturn Device Type:
Tab at 12: 00 o'clock
Longest Horizontal Distance Between Mounting Centers:
1.370 inches single mounting facility and 1.380 inches single mounting facility
Operating Tempurature Range:
-65.0/+125.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
2 single section rear
Throw Quantity:
6 single section rear
Mounting Method:
Threaded bushing 1st mounting facility
Mounting Method:
Threaded hole 2nd mounting facility
Thready Qty Per Inch (tpi):
32 2nd mounting facility
Thread Size:
0.138 inches 2nd mounting facility
Thread Size:
0.375 inches 1st mounting facility
Contact Voltage Rating In Volts:
300.0 ac at sea level
Contact Voltage Rating In Volts:
30.0 dc at sea level
Mounting Facility Pattern:
Two position in-line single mounting facility
Switch Actuator Indexing Position Quantity:
6 single actuator
Shaft Type:
Round single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Breaks before makes single section rear
Switch Actuator Positioning Increment:
30.0 degrees single actuator
Contact Load Current Rating:
50.0 milliamperes resistive load ac at sea level
Contact Load Current Rating:
500.0 milliamperes resistive load dc at sea level
Style Designator:
Tap, square frame
Test Data Document:
81349-mil-s-3786/14 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator:
Unc 2nd mounting facility
Thread Series Designator:
Unef 1st mounting facility
Item Name:
Switch Control,rotary
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
