Product Technical Spec.
Thread Class:
2a single mounting facility
Thread Length:
0.417 inches single mounting facility and 0.457 inches single mounting facility
Hazardous Locations/environmental Protection:
Explosion proof
Overall Length:
Between 2.230 inches and 2.260 inches
First Flat Length:
0.230 inches single actuator and 0.270 inches single actuator
Flat Height:
0.215 inches single actuator and 0.223 inches single actuator
Shaft Diameter:
0.248 inches single actuator and 0.251 inches single actuator
Shaft Length:
0.854 inches single actuator and 0.894 inches single actuator
Overall Diameter:
Between 1.155 inches and 1.185 inches
Nonturn Device Radius:
0.360 inches at 3: 00 o'clock and 0.390 inches at 3: 00 o'clock
Individual Section Quantity:
2
Nonturn Device Type:
Tab at 3: 00 o'clock
Operating Tempurature Range:
-65.0/+85.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
2 each section front
Throw Quantity:
4 each section rear
Mounting Method:
Threaded bushing single mounting facility
Thread Size:
0.375 inches single mounting facility
Contact Voltage Rating In Volts:
115.0 ac at sea level
Contact Voltage Rating In Volts:
28.0 dc at sea level
Shaft Flat/slot Angular Location:
216.0 degrees from nonturn device single actuator
Rotor Through Connection Quantity:
1 each section
Switch Actuator Indexing Position Quantity:
4 single actuator
Shaft Type:
Round, flatted single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Breaks before makes each section rear
Switch Actuator Positioning Increment:
45.0 degrees single actuator
Detent Rotational Torque Range:
+0.500/+2.500 inch-pounds single actuator
Contact Load Current Rating:
2.0 amperes resistive load ac at sea level
Contact Load Current Rating:
1.0 amperes resistive load dc at sea level
Style Designator:
Tap, circular, bushing mount
Thread Series Designator:
Unef single mounting facility
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
