Product Technical Spec.
Thread Class:
2a single mounting facility
Thread Length:
0.360 inches single mounting facility and 0.390 inches single mounting facility
Overall Length:
Between 2.460 inches and 2.490 inches
Overall Height:
Between 0.985 inches and 1.015 inches
Overall Width:
Between 0.922 inches and 0.952 inches
First Flat Length:
0.360 inches single actuator and 0.390 inches single actuator
Flat Height:
0.211 inches single actuator and 0.221 inches single actuator
Shaft Diameter:
0.247 inches single actuator and 0.250 inches single actuator
Shaft Length:
0.860 inches single actuator and 0.890 inches single actuator
Nonturn Device Radius:
0.365 inches at 9: 00 o'clock and 0.385 inches at 9: 00 o'clock
Individual Section Quantity:
2
Nonturn Device Type:
Tab at 9: 00 o'clock
Operating Tempurature Range:
-25.0/+85.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
1 each section rear
Throw Quantity:
5 each section rear
Mounting Method:
Threaded bushing single mounting facility
Thread Size:
0.375 inches single mounting facility
Contact Voltage Rating In Volts:
110.0 ac at sea level
Contact Voltage Rating In Volts:
28.0 dc at sea level
Shaft Flat/slot Angular Location:
210.0 degrees from nonturn device single actuator
Switch Actuator Indexing Position Quantity:
5 single actuator
Shaft Type:
Round, flatted single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Breaks before makes each section rear
Switch Actuator Positioning Increment:
60.0 degrees single actuator
Switch Actuator Stop Device Type:
Fixed stop single actuator
Contact Load Current Rating:
2.0 amperes resistive load dc at sea level
Contact Load Current Rating:
1.0 amperes resistive load ac at sea level
Style Designator:
Circular wafer, bushing mount
Test Data Document:
49671-992416 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Thread Series Designator:
Unef single mounting facility
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
