Product Technical Spec.
Thread Class:
2a single mounting facility
Thread Length:
0.250 inches single mounting facility
Overall Length:
2.255 inches
Overall Height:
1.437 inches
Overall Width:
1.312 inches
First Flat Length:
0.208 inches single actuator and 0.218 inches single actuator
Flat Height:
0.210 inches single actuator and 0.220 inches single actuator
Shaft Diameter:
0.249 inches single actuator and 0.251 inches single actuator
Shaft Length:
0.620 inches single actuator and 0.630 inches single actuator
Nonturn Device Radius:
0.432 inches at 3: 00 o'clock and 0.442 inches at 3: 00 o'clock
Individual Section Quantity:
4
Nonturn Device Type:
Tab at 3: 00 o'clock
Operating Tempurature Range:
-65.0/+85.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
1 each section front
Throw Quantity:
18 each section rear
Mounting Method:
Threaded bushing single mounting facility
Thread Size:
0.375 inches single mounting facility
Contact Voltage Rating In Volts:
115.0 ac at sea level
Contact Voltage Rating In Volts:
28.0 dc at sea level
Shaft Flat/slot Angular Location:
180.0 degrees from contact position 1 single actuator
Rotor Through Connection Quantity:
1 each section
Switch Actuator Indexing Position Quantity:
18 single actuator
Shaft Type:
Round, flatted single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Breaks before makes each section rear
Switch Actuator Positioning Increment:
20.0 degrees single actuator
Detent Rotational Torque Range:
+2.000/+8.000 inch-pounds single actuator
Contact Load Current Rating:
1.0 amperes resistive load dc at sea level
Contact Load Current Rating:
300.0 milliamperes resistive load ac at sea level
Style Designator:
Tap, circular frame
Test Data Document:
81349-mil-s-3786 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator:
Unef single mounting facility
Item Name:
Voltage Selector
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
