Product Technical Spec.
Thread Class:
2a single mounting facility
Thread Length:
0.406 inches single mounting facility
Width Between Flats:
0.188 inches single actuator and 0.189 inches single actuator
Hazardous Locations/environmental Protection:
Explosion proof and watertight
Overall Length:
1.640 inches
First Flat Length:
0.281 inches single actuator
Shaft Diameter:
0.248 inches single actuator and 0.250 inches single actuator
Shaft Length:
0.375 inches single actuator
Overall Diameter:
0.750 inches
Individual Section Quantity:
1
Nonturn Device Type:
Flatted bushing at 12: 00 o'clock
Operating Tempurature Range:
-40.0/+85.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
1 single section rear
Throw Quantity:
2 single section rear
Mounting Method:
Threaded bushing w/panel seal single mounting facility
Thread Size:
0.375 inches single mounting facility
Contact Voltage Rating In Volts:
110.0 ac at sea level
Contact Voltage Rating In Volts:
28.0 dc at sea level
Shaft Flat/slot Angular Location:
165.0 degrees from nonturn device single actuator
Switch Actuator Indexing Position Quantity:
2 single actuator
Shaft Type:
Round, parallel flatted, threaded hole single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Breaks before makes single section rear
Switch Actuator Positioning Increment:
30.0 degrees single actuator
Switch Actuator Stop Device Type:
Fixed stop single actuator
Contact Load Current Rating:
1.0 amperes resistive load dc at sea level
Contact Load Current Rating:
500.0 milliamperes resistive load ac at sea level
Precious Material And Location:
Contact surfaces silver
Precious Material:
Silver
Style Designator:
Snap or line
Thread Series Designator:
Unef single mounting facility
Item Name:
Non-illuminated Selector Switch
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
