Product Features
Dummy contacts at positions 11 and 12, shaft drilled and tapped for 6-32 thd 0.125 in. Deep
Product Technical Spec.
Thread Class:
2a single mounting facility
Thread Length:
0.243 inches single mounting facility
Width Between Flats:
0.195 inches single actuator
Hazardous Locations/environmental Protection:
Watertight
Overall Length:
1.000 inches
First Flat Length:
0.203 inches single actuator
Shaft Diameter:
0.250 inches single actuator
Shaft Length:
0.453 inches single actuator
Nonturn Device Radius:
0.406 inches at 1: 30 o'clock
Individual Section Quantity:
1
Nonturn Device Type:
Pin at 1: 30 o'clock
Operating Tempurature Range:
-65.0 to 125.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
3 single section rear
Throw Quantity:
2 single section rear
Mounting Method:
Threaded bushing single mounting facility
Thread Size:
0.375 inches single mounting facility
Contact Voltage Rating In Volts:
115.0 ac at sea level
Contact Voltage Rating In Volts:
115.0 ac at altitude
Contact Voltage Rating In Volts:
28.0 dc at altitude
Contact Voltage Rating In Volts:
28.0 dc at sea level
Shaft Flat/slot Angular Location:
30.0 degrees from nonturn device single actuator
Switch Actuator Indexing Position Quantity:
2 single actuator
Shaft Type:
Round, parallel flatted, threaded hole single actuator
Terminal Type:
Tab, solder lug
Contact Switching Action:
Breaks before makes single section rear
Switch Actuator Positioning Increment:
30.0 degrees single actuator
Switch Actuator Stop Device Type:
Fixed stop single actuator
Contact Load Current Rating:
100.0 milliamperes resistive load dc at altitude
Contact Load Current Rating:
100.0 milliamperes resistive load ac at sea level
Contact Load Current Rating:
200.0 milliamperes resistive load dc at sea level and 20.0 milliamperes inductive load dc at sea level
Contact Load Current Rating:
50.0 milliamperes resistive load ac at altitude
Style Designator:
Circular wafer, bushing mount
Thread Series Designator:
Unef single mounting facility
Item Name:
Switch,master Disconnect
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
