Product Technical Spec.
Thread Class:
2b single mounting facility
Overall Length:
2.339 inches
Overall Height:
2.266 inches
Overall Width:
2.266 inches
First Flat Length:
0.740 inches single actuator and 0.760 inches single actuator
Flat Height:
0.211 inches single actuator and 0.221 inches single actuator
Shaft Diameter:
0.248 inches single actuator and 0.251 inches single actuator
Shaft Length:
0.806 inches single actuator and 0.869 inches single actuator
Individual Section Quantity:
1
Longest Horizontal Distance Between Mounting Centers:
1.495 inches single mounting facility and 1.505 inches single mounting facility
Operating Tempurature Range:
-65.0/+85.0 degrees celsius
Switch Contact Basic Design:
Nonpile-up symmetrical
Pole Quantity:
1 single section rear
Throw Quantity:
12 single section rear
Mounting Method:
Threaded hole single mounting facility
Thready Qty Per Inch (tpi):
32 single mounting facility
Thread Size:
0.164 inches single mounting facility
Contact Voltage Rating In Volts:
115.0 ac at sea level
Contact Voltage Rating In Volts:
28.0 dc at sea level
Shaft Flat/slot Angular Location:
120.0 degrees from contact position 1 single actuator
Mounting Facility Pattern:
Two position in-line single mounting facility
Switch Actuator Indexing Position Quantity:
12 single actuator
Shaft Type:
Round, flatted single actuator
Contact Switching Action:
Breaks before makes single section rear
Switch Actuator Positioning Increment:
30.0 degrees single actuator
Detent Rotational Torque Range:
+2.000/+11.000 inch-pounds single actuator
Contact Load Current Rating:
1.0 amperes resistive load ac at sea level
Contact Load Current Rating:
1.0 amperes resistive load dc at sea level
Style Designator:
Tap, square frame
Test Data Document:
81349-mil-s-3786 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator:
Unc single mounting facility
Item Name:
Sensor Switching Unit
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
10669497-002
