Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
0.9750 inches
Pilot Diameter:
0.6250 inches
Overall Length:
1.8560 inches
Flange Diameter:
1.0620 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
1.0000 inches
Undercut Width:
0.0600 inches
Shaft Diameter:
1.8560 inches single shaft
Shaft Length:
0.4930 inches single shaft
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
86.0 milliamperes
Stator Input Electrical Power Rating:
250.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
140.00
Zso Resistance In Ohms:
23.50
Zrs Resistance In Ohms:
157.00
Rotor Dc Resistance In Ohms:
99.00
Stator Dc Resistance In Ohms:
14.50
Phase Shift Angle In Deg:
4.300 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
15.00 input
Maximum Total Null Voltage Output In Millivolts Per Volt:
18.00
Spline Tooth Quantity:
21 single shaft
Actuator Friction Torque At Plus 25 Deg Celsius:
0.06 inch-ounces
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0006 inches
Shaft End Play:
0.0006 inches
Pilot Length:
0.0620 inches
Shoulder Length:
0.0620 inches
Mounting Surface To Terminal End Distance:
1.7320 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Maximum Runout:
0.0008 inches
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Length:
0.2430 inches single shaft
Plus J Zro Reactance In Ohms:
713.00
Plus J Zso Reactance In Ohms:
146.00
Plus J Zrs Reactance In Ohms:
74.60
Shaft Type:
Spline w/threads single shaft
Transformation Ratio:
2.203 rotor to stator
Shaft Thread Size:
0.190 inches single shaft
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
