Product Technical Spec.
Body Material:
Any acceptable
Body Style:
Standard round c
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.8745 inches and 0.8750 inches
Overall Length:
Between 2.3020 inches and 2.3220 inches
Flange Diameter:
Between 1.4340 inches and 1.4370 inches
Flange Thickness:
Between 0.0900 inches and 0.0960 inches
Undercut Diameter:
Between 1.3090 inches and 1.3150 inches
Undercut Width:
Between 0.0750 inches and 0.0810 inches
Shaft Diameter:
0.1830 inches single shaft and 0.1850 inches single shaft
Shaft Length:
0.5300 inches single shaft and 0.5500 inches single shaft
Securing Hole Quantity:
4
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
24.0 milliamperes
Stator Input Electrical Power Rating:
600.0 milliwatts
Frequency In Hertz:
400.0
Zso Impedance Magnitude In Ohms:
7800.00
Zso Impedance Angle In Deg:
79.67
Rotor Dc Resistance In Ohms:
573.00
Stator Dc Resistance In Ohms:
930.00
Phase Shift Angle In Deg:
5.140 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
40.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
60.00
Electrical Error Angular Range In Minutes:
-3.0/+3.0
Spline Tooth Quantity:
21 single shaft
Torque Gradient Per Angular Deg:
0.030 inch-ounces
Alignment Hole Quantity:
4
Pilot Length:
Between 0.0370 inches and 0.0430 inches
Shoulder Length:
Between 0.1290 inches and 0.1350 inches
Mounting Surface To Terminal End Distance:
1.7720 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Mounting Facility Screw Thread Series Designator:
Unc
Shaft Thread Length:
0.2000 inches single shaft
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Mounting Facility Screw Thread Diameter:
0.884 inches
Transformation Ratio:
0.720 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.0970 inches
Shaft Thread Size:
0.186 inches single shaft
Terminal Type And Quantity:
5 screw
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
