Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round a
Pilot Diameter:
0.5000 inches
Overall Length:
1.6310 inches
Flange Diameter:
0.7500 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.6910 inches
Undercut Width:
0.0570 inches
Shaft Diameter:
0.0900 inches single shaft
Shaft Length:
0.3320 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
6.0 degrees celsius
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
40.0 milliamperes
Stator Input Electrical Power Rating:
0.1 watts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
470.00
Zso Resistance In Ohms:
81.00
Zrs Resistance In Ohms:
590.00
Rotor Dc Resistance In Ohms:
365.00
Stator Dc Resistance In Ohms:
64.00
Phase Shift Angle In Deg:
Between 6.000 input to output and 12.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
60.00
Electrical Error Angular Range In Minutes:
-16.0/+30.0
Actuator Friction Torque At Minus 55 Deg Celsius:
9.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.0 centimeter-grams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0008 inches
Shaft End Play:
Between 0.0003 inches and 0.0015 inches
Pilot Length:
0.0430 inches
Mounting Surface To Terminal End Distance:
1.2410 inches
Plus J Zro Reactance In Ohms:
1770.00
Plus J Zso Reactance In Ohms:
330.00
Plus J Zrs Reactance In Ohms:
190.00
Shaft Type:
Round single shaft
Transformation Ratio:
Between 2.1465 rotor to stator and 2.2165 rotor to stator
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
CTH-8-A-4/L150
Part Number:
CTH-8-A-4/L150
Part Number:
CTH-8-A-4/L150
Part Number:
CTH-8-A-4/L150
Part Number:
CTH-8-A-4/L150
Part Number:
CTH-8-A-4/L150
Part Number:
CTH-8-A-4/L150
