Product Technical Spec.
Body Material:
Steel, corrosion resisting
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
2.0210 inches
Flange Diameter:
Between 0.7450 inches and 0.7500 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
Between 0.6880 inches and 0.6910 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.0895 inches both shafts and 0.0900 inches both shafts
Shaft Length:
0.3600 inches both shafts and 0.3900 inches both shafts
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
40.0 milliamperes
Stator Input Electrical Power Rating:
100.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
470.00
Zso Resistance In Ohms:
81.00
Zrs Resistance In Ohms:
590.00
Rotor Dc Resistance In Ohms:
365.00
Stator Dc Resistance In Ohms:
64.00
Phase Shift Angle In Deg:
8.500 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
40.00
Electrical Error Angular Range In Minutes:
-15.0/+15.0
Actuator Friction Torque At Minus 55 Deg Celsius:
9.00 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.00 centimeter-grams
Pilot Length:
0.0430 inches
Mounting Surface To Terminal End Distance:
1.2410 inches
Cubic Measure:
0.219 cubic inches
Plus J Zro Reactance In Ohms:
1770.00
Shaft Slot Depth:
0.0470 inches both shafts
Plus J Zso Reactance In Ohms:
330.00
Shaft Slot Width:
0.0200 inches both shafts
Plus J Zrs Reactance In Ohms:
190.00
Shaft Type:
Round, slotted both shafts
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC