Product Technical Spec.
Body Material:
Any acceptable
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
Between 1.5980 inches and 1.6280 inches
Flange Diameter:
Between 0.7470 inches and 0.7500 inches
Flange Thickness:
0.0620 inches
Undercut Diameter:
0.6910 inches
Undercut Width:
0.0570 inches
Shaft Diameter:
0.0895 inches single shaft and 0.0900 inches single shaft
Shaft Length:
0.3170 inches single shaft and 0.3470 inches single shaft
Maximum Tempurature Rise:
6.0 degrees celsius
Stator Input Voltage Rating In Volts:
Between 11.7 and 11.9
Stator Input Current Rating:
43.0 milliamperes
Stator Input Electrical Power Rating:
120.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
Between 340.00 and 460.00
Zso Resistance In Ohms:
Between 51.00 and 69.00
Zrs Resistance In Ohms:
692.00
Rotor Dc Resistance In Ohms:
Between 328.50 and 401.50
Stator Dc Resistance In Ohms:
Between 57.60 and 70.40
Phase Shift Angle In Deg:
10.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
30.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
10.50
Electrical Error Angular Range In Minutes:
-5.0/+5.0
Actuator Friction Torque At Minus 55 Deg Celsius:
9.00 inch-ounces
Actuator Friction Torque At Plus 25 Deg Celsius:
3.00 inch-ounces
Pilot Length:
0.0400 inches
Mounting Surface To Terminal End Distance:
1.2410 inches
Plus J Zro Reactance In Ohms:
Between 1207.00 and 1633.00
Shaft Slot Depth:
0.0250 inches single shaft
Plus J Zso Reactance In Ohms:
Between 216.00 and 292.00
Shaft Slot Width:
0.0200 inches single shaft
Plus J Zrs Reactance In Ohms:
Between 127.50 and 172.50
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
Between 127.500 rotor to stator and 172.500 rotor to stator
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
No other part numbers with same form, fit, and function found.
