Product Technical Spec.
Body Style:
Standard round a
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.6150 inches
Flange Diameter:
Between 0.7490 inches and 0.7500 inches
Flange Thickness:
Between 0.0590 inches and 0.0650 inches
Undercut Diameter:
Between 0.6880 inches and 0.6910 inches
Undercut Width:
Between 0.0590 inches and 0.0650 inches
Shaft Diameter:
0.0900 inches single shaft and 0.0920 inches single shaft
Shaft Length:
0.3750 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
125.0 degrees celsius
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
40.0 milliamperes
Stator Input Electrical Power Rating:
70.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
475.00
Zso Resistance In Ohms:
65.00
Zrs Resistance In Ohms:
553.00
Rotor Dc Resistance In Ohms:
325.00
Stator Dc Resistance In Ohms:
62.00
Phase Shift Angle In Deg:
8.000 input to output
Electrical Error Angular Range In Minutes:
-3.5/+3.5
Actuator Friction Torque At Minus 55 Deg Celsius:
9.0 centimeter-grams
Shaft Maximum Radial Play:
0.0005 inches
Shaft End Play:
Between 0.0003 inches and 0.0008 inches
Pilot Length:
0.0390 mils and 0.0430 centimeters
Mounting Surface To Terminal End Distance:
1.2400 inches
Shaft Maximum Runout:
0.0010 inches
Plus J Zro Reactance In Ohms:
1780.00
Plus J Zso Reactance In Ohms:
28.00
Plus J Zrs Reactance In Ohms:
157.00
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.0500 inches
Alignment Hole Bolt Circle Diameter:
0.5730 inches
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
4.0 ounces
Terminal Type And Quantity:
5 wire lead
Item Name:
Synchro,control Transformer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
1497863-0000
Part Number:
3563080-0201
